Nicole Project 3

3.1 THREE Dimensional Printing:

Nest Test:

Screen Shot 2015-03-17 at 3.49.08 PM Screen Shot 2015-03-17 at 3.49.36 PM

Final Try:

Screen Shot 2015-03-20 at 12.38.46 PM

IMG_5669

After generating the 3D model in Beetleblocks I had to bing the object in to Rhino so that I could edit the mesh and make the model flat at the bottom. The reason for this was because the nest was not evenly flat, causing complications at when starting the print. This also made it easier to rotate the object in space.

The print took around 5.5 hrs in a Makerbot.

The Settings where:

speed: 100mm/s

Quality: medium

The final outcome had some small errors when the nest cantilevers, but over all it is a good outcome.

 

Other Tests:

Screen Shot 2015-04-21 at 5.54.46 PM Screen Shot 2015-04-21 at 6.03.04 PM Screen Shot 2015-04-22 at 1.53.32 PM

 

1 Response

Leave a Reply